Universal 433MHz Garage Remote – 4-Button Cloning Duplicator with Long-Range Wireless Control

Easily duplicate your existing garage, gate, or lighting remotes with this 433MHz 4-Button Universal Remote Control. Perfect for replacing lost remotes or creating spares, this device features a wide compatibility range, up to 100m transmission in open spaces, and quick learning functionality. Available in bulk packs (5–50pcs), it's ideal for personal use or resale.

SPECIFICATIONS

• Brand Name: KEBIDU
• Model Number: 433 MHz Duplicate Remote Control
• Frequency: 433 MHz
• Battery: 12V 27A (included)
• Channel: 4 buttons
• Transmitting Distance: 50–100m (open area)
• Use: Universal, Lighting, Electric Doors, Automated Curtains, Switches
• Wireless Communication: RF
• Origin: Mainland China
• APP Support: No
• Package: No
• Chemical Concern: None

FEATURES

• Multi-Use Compatibility: Works with garage doors, electric gates, RF lighting systems, and more.
• Cloning Function: Learns from existing 433 MHz fixed-code remotes.
• Long Range: 50–100 meters transmission distance in open environments.
• Battery Included: Comes ready to use with a pre-installed 27A 12V battery.
• Affordable Bulk Packs: Choose from 5 to 50 pieces for wholesale or dropshipping.

PAIRING INSTRUCTIONS

1. Clear Existing Code:

   • Hold the two top buttons until the LED flashes briefly and turns off.

   • After ~2 seconds, the LED will begin flashing again. This indicates successful code clearing.

2. Copy (Learn a Remote):

   • Place the original remote and this remote close together.

   • Press the desired button on both remotes simultaneously.

   • When the LED on the clone remote flashes continuously, the button has been successfully copied.

   • Repeat for the remaining three buttons.

3. Restore Last-Cleared Code:

   • If code was cleared accidentally, press both bottom buttons simultaneously.

   • After ~3 seconds, the LED will flash rapidly. This confirms the old code was restored.

NOTE

• Always clear the existing code before starting a new copy.
• After clearing, test by pressing any button — if the LED blinks once and goes out, the memory is empty.
• This remote is compatible with most 433MHz fixed-code systems but does not work with encrypted or rolling code systems.